Powerful Graphics Creation

Powerful 3D chisel algorithm quickly and easily generates "V" or hand carved looking graphics and / or text. Select different conical or V-Bit tools and with the click of a mouse, automatically figure out the depth required to create "V" grooved artwork. Toolpaths do not have to be generated to know the depth required.

The 3D chisel was generated using a 90° V-Bit with a 1.25" inch cutting diameter. The text was generated in ProfileLab 3D using the Times New Roman True Type font set at a height of 1.547 inches. The maximum cut depth is 0.1317 inches.

An example of a two tool job using a 3D chisel and a S-sweep fill. A 1/8th inch end mill is used with the S-sweep fill to mill out the logo at a depth of 0.2 inches. A 90° V-Bit with a 1.25" inch cutting diameter and flat bottom tip of 0.02 inches is used with the 3D chisel toolpath to create a hand carved look. The maximum cut depth is 0.2 inches. Two tool jobs are easily managed either automatically using ProfileLab's ATC (Automatic Tool Change) support or by enabling / disabling tools using the Toolpath Viewer.