| View previous topic :: View next topic |
| Author |
Message |
graffitiworkssigns
Joined: 09 Aug 2005
Posts: 2
|
 Posted: Sat Mar 12, 2011 10:50 pm Post subject: Installing signlab e6.1 on windows xp |
 |
|
| I have signlab e6.1 currently installed on a computer with windows 2000 sp2 but it is starting to have problems. I was wondering if it is possible to install it on a computer with windows xp sp3. I put the disk in but nothing happens and when I open up the file and click setup again nothing happens. I think this might be an upgrade disk so tried using my signlab 5 disk first and it does not work either. Any suggestions??? |
|
| Back to top |
|
 |
frankd
CADlink Employee
Joined: 09 Aug 2005
Posts: 1134
|
| Posted: Sun Mar 13, 2011 8:15 am Post subject: |
|
|
Signlab 5 to Signlab 9 will all work on Windows XP just fine.
Two of my 4 computers still run on XP.
maybe go to
ftp.cadlink.com ( dont click on this link, you need to manually type it in)
Once there, go to pub/Signlab/e61
Download SL61Build17.zip
Unzip it somewhere and run Setup
Its the latest ziped up version of the Signlab 61 CD
Remember you will need to type in your password from your password sheet or you can get it from your Current E61 under File/Install Modules |
|
| Back to top |
|
|
graffitiworkssigns
Joined: 09 Aug 2005
Posts: 2
|
| Posted: Sun Mar 13, 2011 11:46 am Post subject: |
|
|
| frankd wrote: | Signlab 5 to Signlab 9 will all work on Windows XP just fine.
Two of my 4 computers still run on XP.
maybe go to
ftp.cadlink.com ( dont click on this link, you need to manually type it in)
Once there, go to pub/Signlab/e61
Download SL61Build17.zip
Unzip it somewhere and run Setup
Its the latest ziped up version of the Signlab 61 CD
Remember you will need to type in your password from your password sheet or you can get it from your Current E61 under File/Install Modules |
Okay I unzipped it to my desktop and have now clicked the setup(computer and open box) file and the sandtimer goes around and around a few times and then stops and nothing starts installing. |
|
| Back to top |
|
|
brittany
Joined: 20 Jan 2006
Posts: 1
|
| Posted: Thu Oct 27, 2011 2:20 pm Post subject: Signlab 6 on windows xp sp3 |
|
|
| Is there a patch to allow Signlab 6 to run on Windows XP SP3? |
|
| Back to top |
|
|
frankd
CADlink Employee
Joined: 09 Aug 2005
Posts: 1134
|
| Posted: Thu Oct 27, 2011 4:07 pm Post subject: |
|
|
i have Signlab 6 build 17 running on a XP service pack 3.
as a matter of fact, it this laptop im using now.
What is the exact problem you are having brittany?
Go to Help/about Signlab
what does it say is your version and revision |
|
| Back to top |
|
|
frankd
CADlink Employee
Joined: 09 Aug 2005
Posts: 1134
|
| Posted: Fri Oct 28, 2011 12:22 pm Post subject: |
|
|
graffitisignworks
not sure if it was a good idea to unzip it to the desktop.
try unzipping it to c:\temp |
|
| Back to top |
|
|
mod19r
Joined: 07 Mar 2012
Posts: 2
|
| Posted: Thu Mar 08, 2012 8:04 pm Post subject: |
|
|
| Is this patch still available somewhere? |
|
| Back to top |
|
|
turboian
Joined: 09 Aug 2005
Posts: 1
|
| Posted: Sun Jan 20, 2013 9:49 am Post subject: Signlab 6.1 revision 17 |
|
|
| I can't find any such location for downloading the latest version of Signlab 6.1 ...can you let me know asap |
|
| Back to top |
|
|
frankd
CADlink Employee
Joined: 09 Aug 2005
Posts: 1134
|
| Posted: Mon Jan 21, 2013 10:48 am Post subject: |
|
|
maybe go to
ftp.cadlink.com ( dont click on this link, you need to manually type it in)
Once there, go to pub/profilelab/release
Download PLe61_B17_0423D.zipUnzip it somewhere and run Setup
Its the latest ziped up version of the Signlab 61 CD
Remember you will need to type in your password from your password sheet |
|
| Back to top |
|
|
|
English
Français
Italiano
Español
Deutsch
