frankd
CADlink Employee
Joined: 09 Aug 2005
Posts: 1134
|
 Posted: Mon Mar 21, 2011 2:20 pm Post subject: US CUTTER LaserPoint drivers |
 |
|
There are 2 updated US Cutter LaserPoint cutter drivers on our FTP site.
They fix a curios bug whereby the cuuter will not cut anything if there are Carridge return/Line Feeds in the cut data. Carridge return Line Feeds are perfectly valid DMPL , but the cutter will not cut if they are present.
If you need the drivers, you can go to
ftp.cadlink.com
Dont click on the link above. You need to manually type it in in your browser.
Then go to pub/cadlink/plotterdrivers/
Then go to either sl9 or sl8a depending on your version of Signlab.
Download USLAS36.ini and/or USLASERP.INI
Also download dmpl.dll
Copy these files to your Signlab directory.
In Signlab, go to Plotter Setup
Click on Load New Driver.
Find you Laser Point driver in the and add it. |
|
English
Français
Italiano
Español
Deutsch
