Printing multiple passes on an Epilog Laser

[Shon]

On any progam sutch Corel, MS word.... When you print to the laser, the standard windows dialog box will come up where you select your printer and if you change the number of copies to 2 for instance, the laser will get a SINGLE job that when you run will engrave once, then the AUTOMATICLY engrave the exact same thing a second time without having to touch the machine. Now doing the exact same thing in EngraveLab, when you print to the laser you get two different jobs instead of one and the second page is labeled page 2 on the laser. You can print both jobs, but the laser will not automatically engrave a second pass on either job. I have used EngraveLab for years and have been unable to find a work around for this problem.....

Any help would be GREATLY appreciated!!!