- This event has passed.
EngraveLab V10 Webinar (1:30PM EST)
September 7 @ 1:30 pm - 2:30 pm
One of the world’s most widely used laser and rotary engraving software packages.
EngraveLab v10 supports the majority of laser and spindle-based engravers on the market today. Join Mark Huggett, CADlink’s in-house engraving software specialist for an overview of the EngraveLab toolset, some widely used features and an open Q&A session which should answer any software related questions you may have.
This event starts 1:30 pm, Eastern Standard Time (EST).
Very Important- Required audio equipment:
It is important that you have a functioning PC microphone and headset. Speakers are not recommended as they feedback through the microphone to everyone attending the webinar. If you must use speakers, ensure that your microphone can be easily/quickly turned off when you do not need to speak.
If you do not have the required audio equipment, please schedule the webinar for a time when you will have the required equipment.
PLEASE NOTE – In order for our experts to better prepare, the cutoff time for registration is 24 hours prior to a webinar.