CADlink forum

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Engravelab 7.1 not engraving fill

Engravelab 7.1 not engraving fill 10 months 3 weeks ago #5365

  • moddes
  • moddes's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
I had to reinstall Engravelab 7.1, and now it will only engrave the outline, and will not engrave the fill. There must be something simple that I have not done, but I have spent hours trying to figure it out. Can anyone help me? It shows the fill in the preview, but when it sends the job to the engraver it makes the outline pass like normal, and then returns to home.

Actually moved this engraver (Roland EGX-300) to a computer with Engravelab 9 Foundation, it did one letter correctly, the typed in a line of type, and it started doing the same thing. Just engraving the outline of the letters. Could this be a problem of the EGX-300? Has anyone ever run into something like this?
Last Edit: 10 months 3 weeks ago by moddes. Reason: more information about the problem
The administrator has disabled public write access.

PVObanner

Engravelab 7.1 not engraving fill 10 months 3 weeks ago #5373

  • rayw
  • rayw's Avatar
  • Offline
  • Administrator
  • Posts: 215
  • Thank you received: 50
  • Karma: 6
Go to Engrave > Engraving Defaults
The is an option "Output Tool Paths" it is likely checked, uncheck it and then Re-check it.
See what options are selected, you need to output toolpaths.
If it was unchecked then this will also likely be the reason.
The administrator has disabled public write access.
Time to create page: 0.048 seconds