CADlink forum

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Engrave lab

Engrave lab 11 months 5 days ago #6180

  • lcart
  • lcart's Avatar
  • Offline
  • New Member
  • Posts: 2
  • Karma: 0
Hi Just wondering I have engrave lab PhotoLaser plus can I connect a router to this software as there is no option to install any kind of drivers?
The administrator has disabled public write access.

PVObanner

Engrave lab 11 months 5 days ago #6182

  • rayw
  • rayw's Avatar
  • Offline
  • Administrator
  • Posts: 379
  • Thank you received: 80
  • Karma: 7
No, the laser edition assumes you will use the printer driver connection to the laser engraver so as you say no machine drivers are available for install.

You would need to upgrade to a bigger package to incorporate both.
The administrator has disabled public write access.

Engrave lab 2 months 1 week ago #6632

  • Stone
  • Stone's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
I do not agree with the post above. There is a sufficient amount of software that can be used to work with lasers. For example, these are programs that convert raster images to vector images, and vector ones to gcode. For example, free distributed programs InkScape, SketchUp, GBRLcontroller, Repetierhost, Cura. Also, many problems arise when users do not pay attention to compatible software and then it turns out that you need to buy it. Here is, for example, a good table, which shows which model and brand corresponds to what kind of security. Still, I want to add one life hack that to the 3D printer you can buy separately the laser. Then you will have a 3D printer and a laser engraver. In any case, the price will not upset you, if you are ready to deal with this issue.


The administrator has disabled public write access.
Time to create page: 0.076 seconds