CADlink forum

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Priming on Sign Lab and sending to Versa Works

Priming on Sign Lab and sending to Versa Works 1 year 4 months ago #5064

  • Signs Ink
  • Signs Ink's Avatar
  • Offline
  • New Member
  • Posts: 4
  • Karma: 0
Does anyone know how to do this?

You would think it would be simple?
The administrator has disabled public write access.

PVObanner

Priming on Sign Lab and sending to Versa Works 1 year 3 months ago #5074

  • rayw
  • rayw's Avatar
  • Offline
  • Administrator
  • Posts: 215
  • Thank you received: 50
  • Karma: 6
Make sure you have the Versaworks palette set as the default palette in Signlab. [...] button at left of palette > load > set default. (browse to Signlab X.x> palettes > foils > roland). Once this is done, close and re-open Signlab to load in the new palette.

Below the Shop palette is another palette the "prime palette" if you cannot see it go to View >Palettes > prime palette. You should see a square with a diagonal line across it, double click the square.and then locate the colour RVW-BK10A (this is Rolands White colour). Choose the option for a Solid Colour. Then Click ADD. There should now be a White Square at the bottom.
Select your object and then click on the white Square to apply a White Primer.
Select the objects and send to versaworks. You should see the Special item in versaworks for the white primer.
The administrator has disabled public write access.

Priming on Sign Lab and sending to Versa Works 1 year 3 months ago #5111

  • Signs Ink
  • Signs Ink's Avatar
  • Offline
  • New Member
  • Posts: 4
  • Karma: 0
I have installed the CMYK - RVW-BK10A in Signlab as my primer. Applied it to my graphics and sent it over to Versa Works, did my setup, changed my vinyl to clear, my inks to w>cmykLcLm, set the dry to 15, return to origin, print only. I am still not getting the tear drop of white to show that the primer is on?
The administrator has disabled public write access.

Priming on Sign Lab and sending to Versa Works 1 year 3 months ago #5117

  • rayw
  • rayw's Avatar
  • Offline
  • Administrator
  • Posts: 215
  • Thank you received: 50
  • Karma: 6
My apologies, the RVW-BK01A is the process white colour, you need the colour RDG_White as the primer, then it will work.

Apologies again.
The administrator has disabled public write access.
Time to create page: 0.051 seconds