CADlink forum

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Knockout Function in Sign Lab?

Knockout Function in Sign Lab? 11 months 2 weeks ago #5343

  • yuned247
  • yuned247's Avatar
  • Offline
  • New Member
  • Posts: 17
  • Karma: 0
Is there a knockout function for Signlab 9.1? If you look at the pic, I am trying to get two objects, one on top of the other, but I want to be able to adjust the gap size as shown in the pic on the right. This pic was taken from SCALP4 (Sure Cuts A Lot Pro 4).
Attachments:
The administrator has disabled public write access.

PVObanner

Knockout Function in Sign Lab? 11 months 2 weeks ago #5344

  • rayw
  • rayw's Avatar
  • Offline
  • Administrator
  • Posts: 213
  • Thank you received: 50
  • Karma: 6
Select the black circle then use Transform > Outline
Make sure Inline is unchecked and then set the outline thickness to the desired value, set the colour to white, click close then select all and weld using the first weld tool. (Basic Weld).

You could achieve the same, by selecting the red circle and choosing the Inline option, or by using the Inlay weld tool and setting a negative Bleed value.The above is the most straight forward.
The administrator has disabled public write access.
The following user(s) said Thank You: yuned247

Knockout Function in Sign Lab? 11 months 1 week ago #5352

  • yuned247
  • yuned247's Avatar
  • Offline
  • New Member
  • Posts: 17
  • Karma: 0
rayw wrote:
Select the black circle then use Transform > Outline
Make sure Inline is unchecked and then set the outline thickness to the desired value, set the colour to white, click close then select all and weld using the first weld tool. (Basic Weld).

You could achieve the same, by selecting the red circle and choosing the Inline option, or by using the Inlay weld tool and setting a negative Bleed value.The above is the most straight forward.

Thank you rayw! This worked perfectly! So awesome!
The administrator has disabled public write access.
Time to create page: 0.058 seconds