CADlink forum

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Print Profile for Mimaki and Avery

Print Profile for Mimaki and Avery 9 months 2 weeks ago #5857

  • Signlink
  • Signlink's Avatar
  • Offline
  • New Member
  • Posts: 18
  • Karma: 0
I am running Signlab 10 with Windows 10, a Mimaki JV 33 Printer and using the Signlab rip not Rasterlink. Finding anyone that creates profiles for the Signlab Rip is impossible. Does anyone know of one for the new Avery MPI 1105 wrap material.

Thanks, Mike
The administrator has disabled public write access.

PVObanner

Print Profile for Mimaki and Avery 9 months 2 weeks ago #5864

  • Signlink
  • Signlink's Avatar
  • Offline
  • New Member
  • Posts: 18
  • Karma: 0
I have just learned through one of my suppliers that the new Avery Wrap Material MPI 1105 has changed in it's printability. I always used a default profile which worked best for clarity and colour on my Mimaki JV33-130. When I use the Default profile now the Clarity is there but the greys turn Pinkish. Can Signlab supply a new profile for this combo since none of the Material Suppliers recognize the Signlab rip for the downloaded profiles.

Mike
The administrator has disabled public write access.
Time to create page: 0.046 seconds