CADlink forum

By joining our forum you are agreeing to CADlink Technology's privacy policy. You may opt out at any time.

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Cannot find endpoint options

Cannot find endpoint options 6 months 3 weeks ago #6525

Hello,

we are using a Roland GS24 with SignLab 9.
Everything was fine, but recently the machine started to head back to the orgin point of cutting, instead of the endpoint. Now I have to manually set the origin everytime after cutting.

I took a look at the manual, found the "End Point" tab, but i actually cant find the "End Point" Option under the Plotter tab. There are only options for "Start Point", which is set to lower left and "End Point" which is set to lower right. I cant choose between "End" or "Origin"

Do i miss something?

Thanks in advance!
Philip
The administrator has disabled public write access.

Cannot find endpoint options 6 months 3 weeks ago #6526

Hi Philip,
No I don't think you are missing anything, the options you have chosen with origin lower left and endpoint lower right are correct and should be all you need for the cutter to finish at the end of the job.
The administrator has disabled public write access.
Time to create page: 0.042 seconds