CADlink forum

By joining our forum you are agreeing to CADlink Technology's privacy policy. You may opt out at any time.

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Blade Runner 5000 driver

Blade Runner 5000 driver 5 months 4 days ago #6598

Hi Folks, Im testing out Signlab 10 but am unable to get it working with my very oldish Techno-arts BladeRunner 5000 plotter. Migh be old but it is a work horsae & still going strong
I used the ioline Signature 5000 drivers with Flexisign in the past but that driver is not listed in the driver selection for ioline in Signlab.
Anyone got a work around for this before I even think about taking the plunge.

Thank you in advance.
Last Edit: 5 months 4 days ago by EnigmaPrime.
The administrator has disabled public write access.

Blade Runner 5000 driver 5 months 3 days ago #6600

That is old, which probably means its got another 30 years left in it.
I still remember TechoArt 5 1/4 inch floppies

In our driver list under Ioline you should see Ioline 5000 HPGL
Its the 8th down in the list.
The administrator has disabled public write access.
Time to create page: 0.043 seconds