CADlink forum

By joining our forum you are agreeing to CADlink Technology's privacy policy. You may opt out at any time.

Welcome, Guest
Username: Password: Remember me

CADlink, leading developers for sign making, engraving, inkjet film, 2D, 3D routing CNC machines software

TOPIC: Contour cut with summa d140 and signlab 10

Contour cut with summa d140 and signlab 10 4 months 11 hours ago #6687

Hello. I have now change from Summa d60 to d140. Im now print a transfer object. when i'm going to cut out, it will cut it wrong. it cuts about 1mm wrong in y Axis. I have calibrated opos and use 3x3mm opos.
is that something i miss? has a contour cut a lot before but on the new it becomes strange
The administrator has disabled public write access.

Contour cut with summa d140 and signlab 10 3 months 4 weeks ago #6695

Do you still have the D60 cutter and Queue setup in VPM?
Try sending a job to the D140 using the D60 queue, do the registration marks work with that?
also try sending to the D60 using the D140 queue (if you still have the cutter),

The cutting should be identical for both cutters, we cannot make any adjustments in how the data is sent apart from OPOS marks size and offset.
The administrator has disabled public write access.
Time to create page: 0.041 seconds